So, as you may have noticed, I have been MIA. I've been holding therapy sessions for the cast of Prison Break. The show was cancelled years ago but they were sure that a show about a guy trying to escape out of prison could last at least ten seasons. Now they are dealing with the fallout of a stupid, stupid concept for a show. First step is acceptance of their stupidity.
And second thing taking up most of my time is the official sequel to my favorite game when I was but a wee lass, River City Ransom. I loved everything made by Technos back in the day so it fills my heart with happiness to make the official sequel. It honestly makes me incredibly happy. Maybe too happy in fact. Oh god... too much happiness filling my heart... about to burst... must think depressing thoughts... Season four of Arrested Development, Indiana Jones in the fridge, X-Men 3, anything made by Uwe Boll... phew.
So yeah, if at all interested in this project go over to the Kickstarter Page and check it out. Donate if you want or tell your rich affluent friends and associates to do it instead. This project will hopefully lead into bigger and better things in the future for Into This World.
Showing posts with label kickstarter. Show all posts
Showing posts with label kickstarter. Show all posts
Monday, September 9, 2013
Thursday, February 14, 2013
SUPER HD TURBO REMIX RAINBOW EDITION: FOURTH STRIKE!
Since I can never leave my pixels alone, I went back and redid all my sprites. I think this should be the last time I mess with the pixels (we'll see). I'm a pixel bully. Constantly messing with them. And taking their money too. And kissing their girlfriend in front of them. And then coming over to their house afterwards and proving how helpful I am with helping the pixel's mom set the dining room table which leads to her inviting me over more so I can mess with them in their only place of escape.
Who loves examples? Well get in here. I got examples coming out of my wazoo! My god, it hurts. Nothing should ever come out of anyone's wazoo.
"How come I didn't get any milk?"
Who loves examples? Well get in here. I got examples coming out of my wazoo! My god, it hurts. Nothing should ever come out of anyone's wazoo.
EXAMPLES!
Here is an example of the original knife slash move for Drea step by step. Original version is on the left and the new one... wait for it... is on the right! Imagine that. Single frames by themselves are new frames added in more fluid animation.
Her original face always annoyed me. Looked like a doll's face. A creepy doll in your grandma's room that seemed to stare at you with disapproval.
Little more build up in grabbing knife.
More of a blur for the knife streak. Plus her knife now gives off a shine onto Drea.
All the knife attacks now end with this staggered fade out effect.
I actually filmed myself slashing a knife for reference because the original always seemed like a weird way to recoil after swinging a knife.
More recoil.
The main reason behind going over these animations and re-shading them is because I got to play a demo of the game and the dynamic lighting that lit up Drea made here look very out of place and showed off how muddy her original coloring was. Plus, I'm a little obsessive.
FINAL VERSION!
And for no good reason besides he rocks, I was watching this earlier. Take it away Mike...
Labels:
animation,
b2thec,
bannon rudis,
effects,
game,
girl,
Into This World,
itw,
kickstarter,
Metroidvainia,
mike patton,
pixels,
sprite,
sprites,
woman
Tuesday, January 15, 2013
Cat Launcher
I thought I would share a new weapon I cooked up today for Into This World. This is going to be a hard one to find in the game. Don't ask how. Mainly because I don't even know how. It's that f'ing secret.
It's called....
It's called....
THE CAT CANNON!
"For the record, I really do love cats. Here is some proof."
ULTIMATE CAT NAP!
"Ugh. Is that what I look like in 3D? The camera adds a few pounds. A few pounds of ugly. Hey oh!"
Labels:
animation,
cat,
cats,
Drea,
Into This World,
itw,
kickstarter,
Metroidvainia,
pixels,
sprite,
sprites
Friday, December 7, 2012
Meet The Stranger
Filming is about to happen for the Into This World Short Film and I am finalizing the other character in my cinematic tour de force to end all tour de forces. After my ITW short film comes out, it will pretty much make all other tour de forces before and after feel worse than watching Birdemic with a disapproving parent that doesn't "get it". Sorry Alan.
The other character in the short is known as The Stranger. In the game, he will be your local arms dealer and also upgrade your gear. He is very handy to have around but he is also not be trusted. While doing his usual scavenging, I think he might have found Ol' Uncle Willy's secret stash of meth and other recreational drugs.
Wow, this post apocalyptic wasteland sure does look like a well kept apartment building in the background. Hmmm... I'm calling shenanigans.
The other character in the short is known as The Stranger. In the game, he will be your local arms dealer and also upgrade your gear. He is very handy to have around but he is also not be trusted. While doing his usual scavenging, I think he might have found Ol' Uncle Willy's secret stash of meth and other recreational drugs.
Wow, this post apocalyptic wasteland sure does look like a well kept apartment building in the background. Hmmm... I'm calling shenanigans.
Labels:
b2thec,
bannon rudis,
commercial,
costume,
design,
enemies,
film,
game,
girl,
Into This World,
kickstarter,
live action,
pixels,
prop,
sprites
Thursday, October 11, 2012
Pre Production Photos
I just wanted to share some photos I whipped up for the Into This World short film I'm directing. It's coming soon for the Kickstarter campaign. This is the concept behind the film: Drea versus pixelated enemies. This will be easy to make. Right? RIGHT?!
And a quick look at Drea's gun. No prop building behind the scenes on this piece. I really didn't want to take the time to explain it all. I think iI was busy watching Cinema Snob reviews at the time. Let's see... Foam, parts of a Nerf gun, flexible thin foam, misc screws, plastic bottle top, other stuff, etc.
Labels:
aliens,
bannon rudis,
boobs,
costume,
creatures,
design,
Drea,
effects,
game,
girl,
Into This World,
kickstarter,
live action,
pixels,
prop,
sprite,
sprites,
video,
woman
Sunday, September 23, 2012
Into This World Behind The Scenes: The Props: The Arm!
So if you have been following the blog so far.... GOOD! If not, go back to the older posts to know what the hell I am yammering on about. For those in the know, here is the final prop for Drea's costume. Her mechanical arm.
I almost didn't make this. Not because the level of difficulty but the level of laziness I was feeling at the time. I almost (very close to actually doing it) had the actress playing Drea just roll down her sleeves to cover up what should have been her mechanical arm. Then she would have worn a glove to further cover up the fact that I didn't take the time to make the prop. The Bannon of two days was such a lazy pice of crap.
Roll down her sleeves? Psshh! What kind of cinematic genius would I be if I skimped on the most important asset of her costume? Not a good one is the answer. Not a good one.
I started off with a cheap ass glove from the 99 Cents Store. Guess how much a pair of gloves were. You get one fucking guess.
I cut out pieces of my favorite foam (that I mentioned in the older prop making posts) to my liking and glued onto each other and then glued them onto the glove. When the glue was not as hot, I put the glove on so it would form to the shape of a hand instead of laying flat.
I found out this way works better then hot gluing the foam to the glove whilst wearing the glove. Needless to say, I got an "booboo" on my knuckles.
I kept the arm in three separate pieces so the actress could easily move and twist her arm and the arm prop would twist also in accordance. The body of the arm was nothing more than a tubular shaped disinfectant wipes container.
Tubular indeed.
Put all together, it looked like this unpainted. I stuffed a sock in the glove to keep it upright so I could see how it rests in the arm. I then stuffed a sock in my pants and rode the subway. I caught several onlookers gazing upon my majestic bulge.
The actress had a hard time keeping the glove on when the arm portion of the prop would push and bump up on it. I know how hard it is for ladies to handle themselves when I push and bump up on them, so I obliged her. I glued the glove to the inside of the wrist. Then I painted the entire thing in a black primer.
I thought the arm needed some color, so I taped off the black/silver areas and spray painted an olive green on the hand and wrist area. I took a shinier silver spray paint and did the same towel technique but only on the edges where paint might have been chipped on due to Drea's rough housing.
Drea costume: Complete.
Ah shit... her pistol!
Labels:
b2thec,
bannon rudis,
boobs,
commercial,
design,
Drea,
film,
Into This World,
kickstarter,
prop,
video,
woman
Thursday, September 20, 2012
More Costume Stuff: The Hat!
The main character of the game, Drea, wears clothes. I know, I know, it's a stretch. Strong women characters in any medium should be butt ass naked. But alas, I thought I would try a spin on a classic here and give her some clothes. One of those articles of clothing she wears is her hat. It's that thing that goes on top of people's heads.
Drea works for the United Drilling Federation on Mars. And she wears her company's uniform. This build was equal parts easy and difficult to make. Kind of like sexing it up with a really big fat chick. She's got nice cans but good lord, the rest of her could use a tune-up.
Sorry any fat friends I might have offended. What am I talking about? I'm handsome and only hang out with pretty people! Mwah ha ha!
No seriously, sorry.
First step, bam! Get a hat. I went to second hand clothing stores for a perfect olive drab trucker hat. Couldn't find it anywhere. So once again, bam! Went to ebay. Found hat. Ordered. Finally... KABAM!
Second step, bazoom! I proceeded to cut out the shield shape emblem. I carefully cut into the emblem (the difficult part) the UDF logo. Sloppily I might add. Then I cut the foam in half revealing the negative space from the top layer.
Last step. I cut out another shield shape and glued the carved out piece onto the new shield piece of foam. I spray painted it silver then took a black sharpie to the outer rim of the emblem. I colored the inside too to make the lettering "pop". Then I glued that bastard on and I was done, KADOOSH!
Then my cat asked to get some face time on the blog so this happened.
![]() |
| Eh... sort of like that. |
Sorry any fat friends I might have offended. What am I talking about? I'm handsome and only hang out with pretty people! Mwah ha ha!
No seriously, sorry.
First step, bam! Get a hat. I went to second hand clothing stores for a perfect olive drab trucker hat. Couldn't find it anywhere. So once again, bam! Went to ebay. Found hat. Ordered. Finally... KABAM!
Second step, bazoom! I proceeded to cut out the shield shape emblem. I carefully cut into the emblem (the difficult part) the UDF logo. Sloppily I might add. Then I cut the foam in half revealing the negative space from the top layer.
Then my cat asked to get some face time on the blog so this happened.
Labels:
b2thec,
bannon rudis,
commercial,
costume,
design,
Drea,
film,
game,
girl,
Into This World,
kickstarter,
prop
ITW Kickstarter PreProduction: Making the Vest part: TWO!
I'm back, bitches and bitchettes. I got the vest all done and purdy-like today. Let's dip our toes into the jacuzzi and get started.
I threw this painted beauty into the dirt and rocks to rough it up a bit and there you have it, the battle armor vest. Stay tuned for the hat! That's right, a hat! It's a thrill a minute here at the Into This World blog, ain't it?
The first step was to spray paint the vest in a black primer...
"Did someone say Black Slimer? Ah yeah."
No damn it. A black primer. It allows me to cover the vest in an uniform color then I can add other colors on top. Any how. I covered the entire vest in a BLACK PRIMER.
I added some old Korean War pouches onto the vest. Pretty easy. Glued them on and primed them too. Bam!
Step three, or actually 6 or so... Lost count. Step three of part two was to spray paint the body of the vest in an olive drab color. I covered the armor part in masking tape and paper. Make sure to get in every little crack with that tape. I then used a camouflage spray paint and satin olive spray paint to color it.
Hmmm. Satin Olive sounds like a fancy French restaurant. I'll make reservations for this afternoon for two. I'll see if my mom is available to go. Or maybe the mail lady. I'm so alone.
I did the opposite for the vest once it dried and spray painted the "armor" portion with a metallic silver color and a bright shiny silver for the edges. I brushed off the paint with a paper towel to distress it. I also threw on a nifty little pin for some character. I pinned my own body with hundreds of these pins to give me character. Apparently it still hasn't worked. Maybe nipple piercings will do the trick.
Labels:
b2thec,
bannon rudis,
commercial,
costume,
design,
Drea,
kickstarter,
prop,
woman
Sunday, September 16, 2012
ITW Kickstarter PreProduction: Making the Vest part ONE!
I decided to get started on the pre production side of the live action short based on Into This World. It will be used as my Kickstarter campaign (start saving your pennies now). First thing I wanted to get out of the way was the wardrobe. If the actress doesn't look like her video game counterpart, then she might as well be naked. Well...
I am no stranger to making props. I've done it for my own stuff and for art direction on shorts and webseries. What do I make props out of you ask or did not ask but I will tell you anyway because that is what this whole f'ing post is about. I make most of my props out of foam. It's light weight, semi-cheap and easy to cut (just like my ex wife).
What about the foam?
This is the foam I speak of. You can find it on craigslist every now and then for cheap. It might have to be cleaned because some parents put it in their children's playroom as a fun floor for the kids to fall/piss all over.
I buy mine at Target because I like to support small businesses. A pack of four run about $24 each.
I am no stranger to making props. I've done it for my own stuff and for art direction on shorts and webseries. What do I make props out of you ask or did not ask but I will tell you anyway because that is what this whole f'ing post is about. I make most of my props out of foam. It's light weight, semi-cheap and easy to cut (just like my ex wife).
What about the foam?
This is the foam I speak of. You can find it on craigslist every now and then for cheap. It might have to be cleaned because some parents put it in their children's playroom as a fun floor for the kids to fall/piss all over.
I buy mine at Target because I like to support small businesses. A pack of four run about $24 each.
![]() |
| FOAM! For the love of foam, it's FOOOOOOAAAM!!! |
The first prop I started building was the battle vest that Drea wears. It's a mix between a modern military flak jacket and sci fi armor. It's meant to protect a driller from shrapnel and other debris flying at them.
The base of the vest was a cheap ass life jacket I found at a thriftstore. It's perfect for a thick vest like a flak jacket and it already comes with adjustable straps.
Subscribe to:
Posts (Atom)

.jpg)














































